Jaegers 6" f/10 "GJD" OTA Construction - Focuser Backplate (primed)
 

Primered Focuser Backplate ready for painting - 6 (Click to see an enlarged image.)

 
Here is a picture of the focuser backplate after primer was applied. the holes were also plugged to prevent the primer from clogging up the threads, which allow for the attachment of the focuser support/ collimation ring that will be prepped for finishing next. Once cured, I will be flocking the primed areas with Rustoleum Flat Black Camouflage spray paint.

But, before we move on to the flocking process, I will move on to preparing the Focuser Support/ Collimation Ring.