|
Nearly
ready to receive the Teflon Pad Pivoting Arms used for the application
of tension and pressure on both sides of each of the fork tine's
declination shafts, the Declination Axis Braking System is a crude yet
effecting means of slewing the cradle and telescope unit. The off center
holes are to allow passage of the Declination shafts. The plywood feet
on the unit allows for attachment to the tips of the two fork tines. The
plywood square plate with the off center hole in the foreground will be
used to sandwich and support the tension adjustable teak and Teflon
pivoting pads between it and the top section.
|
|
