|
After
allowing the tack spots to cure a bit, the baffle was caulked into
place with silicon-latex caulking. At this point I was starting to
get over anxious and did not allow the caulking to fully cure before
proceeding with the rest of the baffling process. As you note going
forward, my steps look a messy, but in the end everything work out
fine. If I would have done the baffling process in its proper amount
of time, it would taken over a week to complete. Most of the time of
which would have been spent waiting for paint and caulking to cure.
Now that
the first baffle was in place, it was time to apply the metal
primer.
|
|
